View 84063_315117.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

VISHAY
Vishay Semiconductors
The Constituents of Semiconductor Components
Responsible electronic component and equipment manufacturers are already preparing for the time when the lifespan of their products comes to an end by scrutinizing the materials incorporated and their future recyclability. Recycling laws have already come into force in Germany ("Kreislauf-Wirtschaftsgesetz") and guidelines for electronic scrap are in preparation. The aim is a suitable waste disposal program and, as a preventative measure, a reduction in the content of hazardous damaging materials in such components. In order to conform to this procedure, detailed information about the materials and their quantities is needed. This present overview answers questions put forward by customers as to the constituents and their function in the most important of Vishay Semiconductors' semiconductor products. Special significance is given to so-called "Hazardous Substances". It demonstrates that Vishay Semiconductors' products under normal operating conditions do not expose the applier or environment to any hazard. However, most products nevertheless contain small but necessary quantities of "Hazardous Substances" which can, if not treated correctly or through accidents, be released on a small scale into the environment. The present information was produced with the greatest possible care. Any suggestions for improvement of this brochure are welcome. (known as dioxin) < 2 ppb. In the lists themselves, details of content and composition are separated into the individual parts of the semiconductor component. The most important of these are: Active element: The active element is either a silicon chip or, for optoelectronic components, a chip containing combinations of Ga (Al) (As, P). These are doped with very small amounts of boron, arsenic, phosphorus, zinc and germanium etc. The metallisation consists of thin layers of aluminium, gold or titanium. The chips are generally bonded to the lead frame with a silver epoxy and have gold or aluminium wires bonded to the lead frame. Lead frame: For electrical connection, a metal lead frame made from alloys such as FeNi (42) or CuFe (2) and partly or totally plated with silver is commonly used. The metal alloys contain traces of silver, zinc and phosphorus. Part of the lead frame is also coated with tin/ lead. Case: The semiconductor chip is protected from the environment by a case of glass, plastic or metal. The glass is composed of oxides of silicon and lead together with boron and aluminium. Plastic cases are composed of an epoxy resin filled with up to 70% by weight of quartz particles. Antimony trioxide and brominated epoxy resin (no TBA) are added as flame retardents. Antimony and bromine amount to about 1.6 and 1.0% respectively. In use: In use, it is the content of hazardous substances which is of importance. In Germany, there are a number of lists which give the materials which are potentially hazardous to people and the environment, for example: Appendix II and IV of the "Hazardous Materials Regulations", the TRGS 900 ("MAK-Wert-Liste") and the "Catalog of Materials Hazardous to the Water Supply". These lists, however, are only partially consistent. The names used are often different for materials with the same chemical composition. Furthermore, the use of trivial and trade names often adds to the confusion. Therefore, Vishay Semiconductors use for their descriptions that proposed by the Zentralverband Elektrotechnik und Elektronikindustrie e.V. (ZVEI; Central Association of Electrical Engineering and Electronic Industry) for the harmonization of the nomenclature of hazardous substances.
Definitions
Vishay Semiconductors offers a wide range of semiconductor components including transistors, diodes and opto-electronic components. These have been manufactured in various standard packages. On the following pages, these packages are listed together with their materials shown in weight percentages. In order to limit the number of tables, all components whose structure and composition are the same have been compiled in families. In many cases, different lead frames together with chips of different sizes may be used for the one package. This usually means that there may be slight differences in the quantities of the declared material. The weight percent is, however, valid for a representative sample of the relevant family. In order to sensibly reduce the number and quantities of materials contained in the respective components, quantities smaller than 0.1% by weight have been stated in the following list as traces. This is the case unless lower limits are forced by law, e.g. cadmium < 75 ppm and PCDD as well as PCDF
Document Number 84063 Rev. 7, 07-Jan-03
www.vishay.com 1
VISHAY
Vishay Semiconductors
Instructions are given on the safety precautions to be used during storage and disposal by mechanical, chemical and thermal means of the more important chemicals (so-called "Leitchemikalien"). These are listed in the tables in the order of their potential risk. Their effect upon people and the environment are also listed and any special precautions emphasized. Notes: The following information has been prepared to be as exact and reliable as possible. The manufacture of semiconductor components is, however, subject to regular change without special notification. The publication of this brochure excludes any responsibility resulting from its use.
Ozone Depleting Substances
The use of Ozone Depleting Substances has been totally eliminated by Vishay Semiconductors and by doing so meets the legal requirements as defined in the following documents. 1. The "Montreal Protocol" together with the "London Amendments" Appendix A, B, and the "List of Transitional Substances" 2. "Clean Air Act", Amendments 1990, "Environmental Protection Agency" (EPA), USA, Class I and II - Ozone Depleting Substances 3. "European Council Resolution" number 88/ 540/EEC and 91/690/eec Appendix A, B and C (Transitional Substances) Vishay Semiconductors guarantees that its components do not contain, and are manufactured without, the use of Ozone Depleting Substances
Explanation of Abbreviations
While the information on weight percent is believed correct, discrepancies depending upon component type may be possible. 1) Material information etc. Material listed as "Material Hazardous in Production" 2) S: Trace material < 0.1% by weight; Cd < 75 ppm; concerning Cd see ***) PCDD and PCDF < 2 ppb *) Dioxin content - lies below agreed limits **) No. 85 "Rules for Hazardous Materials", to be replaced as soon as a technically suitable alternative material is available ***) Traces of cadmium can only be found in lead frames made of copper CMT: Material containing carcinogens, mutagens or terratogens Tox: Material is toxic or very toxic S Material with allergy producing characteristics HAL Halogen containing material WKG Material hazardous to the water supply L Storage, suitable for disposal D Disposable M Mechanical disposal N Chemical disposal T Thermal disposal H Handling
www.vishay.com 2
Document Number 84063 Rev. 7, 07-Jan-03
VISHAY
Vishay Semiconductors Contents of a Diode in Sintered Glass Package SOD57
mg Leads, tinned Copper Iron Molybdenum Tin Lead Silver Total weight 370 mg Carbon Oxygen Traces of Mn, P, S Package, glass: PbO SiO2 B 2O 3 Al2O3 Silicon chip: Silicon Aluminum Traces of P, Ga, Pt (Dopant) Si Al 13,80 % 42,00 % 38,00 % 15,00 % 5,00 % 0,30 % 90,00 % 10,00 % 1,00 0,11 2,700 0,300 21,45 19,40 7,66 2,55 57,960 52,440 20,700 6,900 Cu Fe Mo Sn Pb Ag C O2 85,90 % 58,30 % 22,15 % 18,55 % 0,50 % 0,20 % 0,10 % 0,10 % 0,10 % 185,29 70,40 58,96 1,59 0,64 0,32 0,32 0,32 500,797 190,269 159,345 4,295 1,718 0,859 0,859 0,859 ppm
Contents of a Diode in Sintered Glass Package SOD64
mg Leads, tinned Copper Iron Molybdenum Tin Lead Silver Total weight 860 mg Carbon Oxygen Traces of Mn, P, S Package, glass: PbO SiO2 B 2O 3 Al2O3 Silicon chip: Silicon Aluminum Traces of P, Ga, Pt (Dopant) Si Al 13,80 % 42,00 % 38,00 % 15,00 % 5,00 % 0,30 % 90,00 % 10,00 % 2,32 0,26 2,700 0,300 49,85 45,10 17,80 5,93 57,960 52,440 20,700 6,900 Cu Fe Mo Sn Pb Ag C O2 85,90 % 58,30 % 22,15 % 18,55 % 0,50 % 0,20 % 0,10 % 0,10 % 0,10 % 430,69 163,63 137,04 3,69 1,48 0,74 0,74 0,74 500,797 190,269 159,345 4,295 1,718 0,859 0,859 0,859 ppm
Document Number 84063 Rev. 7, 07-Jan-03
www.vishay.com 3
VISHAY
Vishay Semiconductors Contents of a Diode in Sintered Glass Package G1
mg Leads, tinned Copper Molybdenum Tin Lead Silver Phosphorus Total weight 560 mg Traces of S, O2, C Package, glass: ZnO B 2O 3 SiO2 PbO Sb2O3 Traces of P, Pt Silicon chip: Silicon Aluminum Si Al 0,23 % 93,55 % 6,45 % 1,20 0,08 2,152 0,148 37,58 % 62,70 % 24,00 % 10,00 % 2,80 % 0,50 % 131,95 50,51 21,04 5,89 1,05 235,627 90,192 37,580 10,522 1,879 Cu Mo Sn Pb Ag P 62,19 % 77,68 % 20,64 % 1,31 % 0,23 % 0,08 % 0,06 % 270,53 71,88 4,56 0,80 0,28 0,21 483,092 128,360 8,147 1,430 0,498 0,373 ppm
Contents of a Diode in Sintered Glass Package G3
mg Leads, tinned Copper Molybdenum Tin Lead Silver Phosphorus Total weight 1100 mg Traces of S, O2, C Package, glass: Zinc Oxide ZnO B 2O 3 SiO2 PbO Sb2O3 Traces of P, Pt Silicon chip: Silicon Aluminum Si Al 0,23 % 93,57 % 6,43 % 2,37 0,16 2,152 0,148 37,58 % 62,70 % 24,00 % 10,00 % 2,80 % 0,50 % 259,19 99,21 41,34 11,57 2,07 235,627 90,192 37,580 10,522 1,879 Cu Mo Sn Pb Ag P 62,19 % 77,84 % 21,06 % 0,83 % 0,15 % 0,07 % 0,05 % 532,50 144,07 5,68 1,03 0,48 0,34 484,087 130,972 5,162 0,933 0,435 0,311 ppm
www.vishay.com 4
Document Number 84063 Rev. 7, 07-Jan-03
VISHAY
Vishay Semiconductors Contents of a Diode in Sintered Glass Package G4
mg Leads, tinned Copper Molybdenum Tin Lead Silver Phosphorus Total weight 1040 mg Traces of S. O2, C Package, glass: Zinc Oxide ZnO B 2O 3 SiO2 PbO Sb2O3 Traces of P, Pt Silicon chip: Silicon Aluminum Si Al 0,23 % 93,12 % 6,88 % 2,23 0,16 2,142 0,158 37,58 % 62,70 % 24,00 % 10,00 % 2,80 % 0,50 % 245,05 93,80 39,08 10,94 1,95 235,627 90,192 37,580 10,522 1,879 Cu Mo Sn Pb Ag P 62,19 % 69,09 % 29,63 % 0,95 % 0,17 % 0,10 % 0,06 % 446,86 191,64 6,14 1,10 0,65 0,39 429,671 184,269 5,908 1,057 0,622 0,373 ppm
Significant Materials for Disposal
No. Material and/or Group 1) C M T T S H AL W G K Available in the Compound Used for Package glass, lead Lead Part in 2) Weight Percent 6.0 15.9 L D M N T H
1 2
Lead and compounds Molybdenum and compounds

Note: *), **), ***), 1), 2), CMT, T
Document Number 84063 Rev. 7, 07-Jan-03
www.vishay.com 5

▲Up To Search▲

Price & Availability of 84063

	To Download 84063 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .